Hades DIY

  • Analog Monophonic Synthesizer
  • Full Analog Circuit only with Through Hole Components
  • 42HP – Eurorack Compatible
  • 1x VCO with 2 suboctaves and 3 waves (pulse, double saw, saw)
  • Variable Width for pulse and double saw
  • Glide control
  • 3-pole 18dB/oct Resonating State Variable Filter
  • Drive Circuit
  • OTA based VCA
  • 2 envelope Generators – Attack, Decay/Release, Sustain – Attack, Release (VCA hardwired)
  • Triangle and Square Wave LFO
  • 13 patch points eurorack compatible
  • External Input
  • 5 MIDI Octaves from C0 up to C5 or unlimited via CV/Gate
  • When powered via the Cardboard Case: 15V DC 500mA  power supply 2,5mm center pin positive.
    When installed in a Eurorack Case, the current draw is: +12V⇒70mA  , -12V⇒ 65mA
  • MIDI interface: Midi in DIN socket, Pitch note/gate on-off, Pitch wheel,
  • Patches: 3.5mm mono
  • Gate in: activation at 0.9V in a low gain up to 5V for max gain
  • Gate out: 0-5V
  • 1V/oct : sends the MIDI to CV out (not the Gate)
  • CV IN: works at 1V/oct and can accept from +/-12V
  • EG OUT: 0-6.6V depending on the depth setting
  • LFO out: +/-5V
  • Eurorack compatible
  • Cardboard Case
  • Weight: 0,55 kgr
  • 220 x 150 x 80 mm
      SOLD OUT